Blow molding machine is a blow molding has a very important role in professional blow molding equipment, many users find that, in the process of long-term use of blow molding machine, if did not make the corresponding maintenance and maintenance work, water filling machine simple increase blow molding machine to present the probability of failure problems, leading to the blow molding mold. So poor the blow molding machine blowing mold should be how to do?
1, if the mold in the process of blow molding, first need to check the pressure of the blow molding machine, general situation, the air pressure is about 2.0 to 3.0 MPA. If the pressure is normal, need to check the mould structure of exhaust open is reasonable, then adjust the temperature to the appropriate point.
2 manufacturers products in blow molding, blow molding machine, presents the status of the bottle, blow molding machine manufacturers claim check exhaust time Settings, if the exhaust are properly set, every time just in one bottle blowing that present explosion, you can distinguish the defect of exhaust valve, please open the exhaust valve check spring box seal of its status, or to replace exhaust valve.
3, if the blow molding products appear the phenomenon of white, juice filling machine should be appropriate to reduce the temperature, speed or progress.
Plastic material products on the market can be seen everywhere, produce good products rely on good equipment, good plastic blow molding machine equipment, not only produce good craft, and the quality of operation personnel should also have a considerable level, in production, we should have certain knowledge of use and protection, in actual production, enterprises in the mechanical aspects of the training is not all, here is some Suggestions for blow molding machine repair.
Before start work, check the blow molding machine, look to whether need to add lubricant, yield, before beginning to check the reliability of machine parts, if found loose parts, reinforcement in time, prevent the adverse consequences, start the machine, check the power supply, air and water, blow molding machine start, check the related measures, such as check the grille, stop.
Check equipment related lamp and lighting equipment is normal, if there are any damaged change in time, check to see if the device related leak or leaks, machine work before, should first cleaning machine, and at the end of the beginning and clean liquid bottle filling machine and protect mold, blow molding machine should be preheated before start running for half an hour, if no problem after a period of time, will put into produce.
Use range is very broad, in blow molding machine now because of the blow molding machine in use process with excellent product quality and using effect, and still have a long use life, its product sales also in unceasing progress. In use, the blow molding machine won't because of the influence of temperature and humidity and its use life. So, what factors will affect the using life of the blow molding machine to form?
In fact, there are many factors will affect the using life of the blow molding machine to form a certain, for example in the process of use, whether in strict accordance with the correct using method, operation process and use the specification to use blow molding machine, blow molding machine factors such as the quality of the products and use frequency, these will affect the using life of the blow molding machine. But first using the method of blow molding machine, if long time fault using the blow molding machine, will cause the blow molding machine malfunction and damage.