Description
The POLYKEN 980 Oil Pipe Wrap Tape is a multilayer system used for the protection of steel underground
pipelines.The Anti-Corrosion layer POLYKEN 980 Pipeline Outer Tape is engineered to assure a high bond to
the primed surface with excellent conformability characteristics. The mechanical protection layer
Polyken955 Adhesive Tape achieves a complete bond to the POLYKEN 980 Anticorrosion Tape inner layer,
providing maximum handling and in-service protection for the coating
system.
We also production Insulation Adhesive Tape,Visco-elastic Wrap Tape,Butyl Tape,Bitumen Tape.
-Resistant to soil stress
- Excellent adhesion to pipe and self
-Low cathodic protection
-Long-term in-ground performance
- Serve for low-high temperatures
- Cold applied
-Uniform coating thickness
-Compatible with all pipe diameters and generic plant
coating systems
-Qualified ASTM D1000,AWWA C 214,EN 12068 standards
Backing : Special blend of stabilized polyethylene
Adhesive : Butyl rubber and Adhesion Promoting Resins
Total tape thickness in mils:15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm)
Tape width in inches:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)
Tape roll length in feet:100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M)
Properties
Product Properties
Test method
Typical Value
POLYKEN980-15
POLYKEN980-20
POLYKEN980-25
POLYKEN980-30
Total Thickness
15mil(0.381mm)
20mil(0.508mm)
25mil(0.635mm)
30mil(0.762mm)
Backing of PE film
9 mils(0.229 mm)
12mil(0.305mm)
13mil(0.330mm)
10mil(0.254mm)
Butyl Rubber Adhesive
6 mils(0.152 mm)
8mil(0.203mm)
12mil(0.305mm)
20mil(0.508mm)
Tensile Strength
ASTM D1000
40 N/cm
55 N/cm
62 N/cm
70 N/cm
Elongation
ASTM D1000
300%
330%
350%
400%
Peel Adhesion to Primed Steel
ASTM D1000
24.5 N/cm
25 N/cm
26.5 N/cm
30 N/cm
Water Vapor Transmission Rate
ASTM E 96
0.10g/m2
0.10g/m2
0.09g/m2
0.08g/m2
Water absorption after 1 day,At+23℃
ASTM D570
0.10%
0.10%
0. 08%
0. 06%
Volume Resistivity
ASTM D 257
2.0 x 1015 ohm.cm
2.5 x 1015 ohm.cm
2.5 x 1015 ohm.cm
2.5 x 1015 ohm.cm
Dielectric Strength
ASTM D149
30 kV
35 kV
42kv
43kv
Polyken980 production Image
Other Product Recommendations
PE Backing Wrap Around Dust Tape Heat Shrink,PP Fiber Woven Tape,Cold-applied PE bitumen Tape,Double-
side Tape
https://www.pipe-wrap-tape.com/polyken-980-inner-wrap/